Recessed LED Lighting Upgrade and Switch Overhaul in Buckhead

This Buckhead home had a few things working against it - outdated hallway can lights, a Control4 lighting system that was more hassle than it was worth, and wiring that just didn't give the homeowner practical control over their own hallway. Not a bad house by any stretch, but the electrical setup wasn't doing it any favors.

We pulled out the old can lights and replaced them with new Halo recessed LED fixtures throughout the hallway. We also added a new 6-inch recessed light above the stairwell - that tall, narrow space that tends to stay dark and feel a little uninviting. The difference in how the space reads now is significant. Clean, bright, and consistent.

The Control4 system removal was honestly one of the bigger wins here. Those systems made sense for a certain era of home automation, but a lot of homeowners find them clunky and expensive to maintain. We removed it entirely and replaced everything with simple, functional Lutron switches - the kind you can actually count on. We also rerouted wiring so the hallway lighting could be properly controlled from the bedrooms and the stairwell. That's the kind of access that should have been there from the start.

Part of the job that often goes unnoticed - we stripped out old smoke alarms, motion detectors, and unused electrical devices so the drywall and paint crews could come in and finish the space without working around a bunch of leftover hardware. That coordination matters. When trades work in the right order and leave a clean hand-off, the final result is tighter all around.

Good electrical planning isn't just about the fixtures you add. It's about cleaning up what doesn't belong, routing things logically, and making sure the end result actually works the way the homeowner needs it to. That's what we were going for here - and that's what we delivered.